0
class limit.
class boundary.
class mark.
class widh.
1 answer
It is something you use when making a frequency table tally mark =] hope it helped =P
3 answers
Daniel Mark Dobkin has written:
'Principles of chemical vapor deposition' -- subject(s): Vapor-plating, Refractory coating
'The RF in RFID' -- subject(s): Radio frequency, Wireless communication systems, Identification, Radio frequency identification systems
1 answer
-Construct a frequency table
-Draw a horizontal axis and mark off the intervals.Label the horizontal axis.If the first interval does not start at 0, use a "break" symbol on the axis.
-Draw a vertical axis and identify a scale for the frequencies. Label the vertical axis.Often, the vertical axis is "frequency".
-Draw bars with heights corresponding to the frequency values in the table.
-Give the graph an appropriate title.
1 answer
Mark Lopez has written:
'The selection of glide slope antenna patterns for use in the frequency assignment process' -- subject(s): Glide path systems, Antennas (Electronics), Instrument landing systems
1 answer
The ration of a frequency to its total frequency is called relative frequency.
1 answer
No. It is neither man made nor a landmark. It is a region in which strong tornado naturally occur with a relatively high frequency.
1 answer
Relative frequency is a method of calculating the frequency of an event. Percentage frequency is a way of presenting the frequency of an event.
1 answer
frequency meter is used to measure the frequency of unknown frequency signal.
1 answer
Transmit RF frequency subtract to the Receive frequency
1 answer
No, the natural frequency and resonant frequency are not the same. The natural frequency is the frequency at which an object vibrates when disturbed, while the resonant frequency is the frequency at which an object vibrates most strongly when subjected to external forces.
1 answer
If you subtract from the carrier frequency the frequency of the tone that modulates it, then filter out the carrier frequency, then you have a lower sideband frequency. If you add to the carrier frequency, filter out the carrier, then you have an upper sideband frequency.
1 answer
The three frequency components of an amplitude modulation (AM) wave are the carrier frequency, the upper sideband frequency (carrier frequency + modulating frequency), and the lower sideband frequency (carrier frequency - modulating frequency). These components are responsible for carrying the signal information in an AM wave.
1 answer
The cast of The Frequency of Claire - 2008 includes: Jill Bartlett as Bobby Josh Braaten as David Alexandra Holden as Claire Brian Patrick Mulligan as Dr. Litwin Craig Robinson as Q-pid Mark Strohman as Stephon
1 answer
Yes, the resonant frequency is the same as the natural frequency.
1 answer
FM means Frequency Modulated.
FM stands for modulation on frequency or frequency modulation.
3 answers
This is known as the frequency of the wave.
6 answers
The frequency in a frequency table is the number of occurrences within each class width. The total frequency is the sum of all frequency's within all the classes.
1 answer
Incident frequency is the original frequency of an incoming wave, while reflected frequency is the frequency of the wave that is bounced back after hitting a boundary. In general, the incident frequency is the same as the reflected frequency because the wave retains its original frequency upon reflection, assuming no frequency changes occur due to the medium.
1 answer
The angular frequency (omega) of a wave is directly related to its frequency. The frequency of a wave is equal to the angular frequency divided by 2. In other words, frequency omega / 2.
1 answer
The natural frequency of a system is the frequency at which it naturally vibrates when disturbed. The resonant frequency is the frequency at which the system vibrates with the greatest amplitude when subjected to an external force. The resonant frequency is usually close to the natural frequency, but not always the same.
1 answer
Uplink frequency is a frequency that goes from the ground to the satellite. Downlink frequency goes from the satellite to the ground.
1 answer
slow frequency hopping (SFH) technology.
The difference
between slow frequency hopping and fast frequency hopping is that the frequency of latter changes faster than frequency modulation
1 answer
Given a frequency table,
- the first cumulative frequency is the same as the first frequency;
- the second cumulative frequency is the sum of the first cumulative frequency and the second [ordinary] frequency;
- the third cumulative frequency is the sum of the second cumulative frequency and the third [ordinary] frequency;
- and so on.
An alternative definition is that the cumulative frequency for any value is the sum of all the frequencies less than or equal to that value.
1 answer
the frequency is less than OR EQUAL TO the cumulative frequency
1 answer
To find the resonant frequency of a room, you can use a sound frequency generator and a microphone to measure the frequency at which sound waves resonate the most in the room. This frequency is the room's resonant frequency.
1 answer
Resonant frequency is the frequency at which an object naturally vibrates when energy is applied, while natural frequency is the frequency at which an object vibrates without any external force.
1 answer
the amount of frequency change in the carrier frequency per unit amplitude change in the message signal is the frequency sensitivity
this term comes in the frequency moulation
1 answer
How do you convert cellphone gsm frequency to another gsm frequency?"
1 answer
In a harmonic oscillator system, the angular frequency () is related to the frequency (f) by the equation 2f. This means that the angular frequency is equal to 2 times the frequency.
1 answer
The frequency of a harmonic in a sound wave is always an integer multiple of the fundamental frequency. It cannot be higher than the fundamental frequency.
2 answers
The relationship between the angular frequency () and the frequency (f) in the equation 2f is that the angular frequency is equal to 2 times the frequency. This equation shows how the angular frequency and frequency are related in a simple mathematical form.
1 answer
Hertz means cycles per second. That is its' frequency.
4 answers
The frequency of a wave is the same as the frequency of the source that produces it. The frequency of a wave is determined by the frequency of the vibrating source that creates it, so they are directly related.
7 answers
The fundamental frequency of a wave is the lowest frequency at which it can vibrate. This frequency corresponds to the first harmonic or the wave's base frequency. It is the most stable and strongest frequency that the wave can produce.
2 answers
Cumulative Frequency is The total of a frequency and all frequencies so far in a frequency distribution. It is the 'running total' of frequencies in the frequency distribution table.
1 answer
The definition of fundamental frequency is the lowest frequency of a periodic waveform. Sometimes fundamental frequency is abbreviated by FF, containing the lowest frequency starting from 0.
1 answer
Deviation ratio: In a frequency modulation system, the ratio of the maximum frequency deviation of the carrier to the maximum modulating frequency of the system under specified conditions
1 answer
frequency = (wave speed)/(wavelength)
frequency = 1/(period)
1 answer
The signals frequency directly.
1 answer
The symbol for frequency is "f" and the unit for frequency is hertz (Hz).
1 answer
An audio frequency is a frequency, or range of frequencies, of audible sound waves.
1 answer
A.m. can be applied to a carrier of any frequency.
1 answer
frequency of the wave. A higher frequency corresponds to a higher pitch, while a lower frequency corresponds to a lower pitch. This is because frequency is directly related to the perceived pitch of the sound.
3 answers
High frequency waves will have more energy than low-frequency waves. This is because energy is directly proportional to frequency in waves - the higher the frequency, the higher the energy.
1 answer
